|
|
Front part of lamp.
Rim merging with sides; broken along inner edge; close to the break, traces of a reserved band.
Short nozzle, shallow, rounded, encroaching on rim. No base; under surface slightly concave ... 10 August 1931 |
Nozzle and fragment of rim preserved.
On rim, single rill, its bottom reserved.
Nozzle long and deep, scratched in dry clay of its top.
Thin, somewhat metallic black glaze inside and outside.
Fine red ... 17 July 1931 |
Nozzle and front half of infundibulum preserved.
On rim, single groove around filling hole. Mold made.
Traces of knob of left side of body.
Nozzle long, rounded at tip, line of attachment to body on either ... 1931 |
| Nozzle and fragment of rim preserved.
Rim, carried up as a high ridge surrounding the filling hole, around this ridge is a double row of triangles in low moulded relief.
Long, pointed nozzle, flat on top ... 6 July 1931 |
| Rear part of rim and infudibulum preserved. Vertical, strap handle missing.
The top is depressed surrounded by a high lange, the part of rim preserved shows two small holes. Sharply angular. On shoulder, ... 29 August 1931 |
| Double convex body, with triangular nozzle and low, concave base.
On rim, imbricated leaf pattern.
On top, moulded rim around central filling hole. Remains of vertical band handle.
Traces of black glaze ... 29 January 1932 |
Tip of nozzle missing.
Double convex body, with concave top. Wheel made.
Rising vertical band handle, broken at back; long nozzle.
Slightly rising bottom, with central raised disc; base indicated by groove ... 6 February 1932 |
Double convex body, upper part deeper than lower. Traces of pierced knob on left side. On top, two shallow, concentric grooves; edges of filling hole, broken away, probably rose a little.
Nozzle, pointed, ... 12 February 1932 |
| No handle or knob.
Squat body, rounding, merging with rim from which it is set off only by a very shallow groove.
Nozzle, fairly flat on top, but rounding toward wick hole. Nozzle is long and pointed; ... 16 February 1932 |
| End of nozzle broken away.
Double convex, shallow body, the lower part rather deeper than the upper; join between lower part and moulded upper part clearly seen.
On rim, plain round filling hole; set off ... 19 February 1932 |
Fragment of nozzle and top.
Long nozzle, fairly deep, with rather small wick hole. Top flat with incurving sides. Not quite full depth of nozzle preserved.
On top an erect, flat-topped rim 0.02m. wide ... 19 February 1932 |
Fragment of bottom.
Raised base, rising. Rather carefully trimmed. Mold made.
Graffiti in dry clay.
Glazed all over including under side of base. Late black glaze with silvery lustre.
Attic clay.
Type ... 19 February 1932 |
Fragment of top and back and sides.
Double convex body, with lower part deeper than upper. Wheel made.
On top, depression around filling hole with diameter ca. 0.019m. Shallow groove surrounds depression ... 20 February 1932 |
Fragment of inscribed base and root of nozzle.
Flat base, slightly rising. Preserves part of a letter.
Purplish glaze covers outside. Inside, traces of red paint.
Hard red clay.
Type XVIII (post Sullan) ... 20 February 1932 |
Tip of nozzle broken off. No handle. Mold made.
Deep, rather angular body, with greatest diameter near bottom.
Top flat covered, surrounded by raised edge.
Long, deep, wide nozzle, with narrow flat top ... 20 February 1932 |
| Vertical band handle, tip and one side of nozzle broken away.
Double convex body, with decoration in relief on upper part; series of large and small grooved rectangles; row of dots above and below.
Small, ... 23 February 1932 |
| Left side of body broken off. Horizontal band handle broken away.
Body narrows slightly toward top. Medium wide rim, down sloping; set off from body by wide deep groove.
Long nozzle, flat on top; rather ... 24 February 1932 |
| Body, flat, angular, double convex.
On top, moulded band around filling hole, like slightly raised rim.
Long nozzle, pointed, with wick hole damaged from use.
Knob on left side, perforated near front ... 1 March 1932 |
Handle broken away.
Body with much rounded sides, with greatest diameter below center.
Slightly raised rim, set off by well-marked groove.
Perforated knob on left side of body.
Long nozzle, tubular (no ... 1 March 1932 |
Fragment of nozzle, rim, and base from large, multiple lamp.
Rim seems to be set off by groove and moulded edge, from which it extends inward horizontally.
Long nozzle, deep. Flat top with edges slighlty ... 1 March 1932 |
| Fragment of nozzle, top and sides. Top and end of nozzle broken away.
Body, sharply profiled.
Raised edge of top; just within, two small holes, spaced as though originally four; center of convex top, slightly ... 1 March 1932 |
| Vertical band handle broken away.
Double convex body.
Rim broad, decorated with ribs.
Discus plain, surrounded by groove; central filling hole.
Nozzle long, large, with central ridge and wide-spread, rounded ... 29 February 1932 |
| Shallow body, unevenly double convex, the broader upper part forming an incurving rim. Top open.
Body wall pulled outward with the thumb to form an open nozzle, now chipped at the end. Vertical handle ... 11 March 1932 |
| Long nozzle, flat top with concave sides and irregular shallow attachment groove. On top scratched in dry clay
Good black glaze inside and out, slightly silvery lustre.
Attic clay.
Type VI (late 5th ... 2 March 1932 |
Top of standard of small lamp. No handle.
Somewhat curving body, with greatest diameter below center.
On top, groove with small inner raised edge around central opening.
Small nozzle, with large wick hole ... 2 March 1932 |
Fragment of rim. Vertical band handle broken away.
Broad rim; curving, with relief decoration of heart motif.
Small top, concave.
Dull black glaze much chipped.
Gray clay.
Type XVIII of Corinth collection, ... 9 March 1932 |
| Open nozzle, with cothon handle. Mended from many fragments; part of the bottom missing.
Flaring rim, nearly flat at back, curving upwards toward front to form the pinched in nozzle. Low broad body with ... 29 February 1932 |
Left side broken away; lamp mended from two fragments.
Narrow rim, sloping; set off by deep groove from well rounded body.
Nozzle, flat on top, with letter "Δ" incised in the dry clay, on top of nozzle; ... 15 March 1932 |
| Small lamp with open socket for stand. Rim and nozzle broken away. Fragmentary.
Rounded body; apparently continuous with rim.
No handle; small solid knob on left side.
Bottom, rising slightly toward center ... 17 March 1932 |
Lamp mended from several fragments; part of back missing. Vertical band handle broken away. No base. Wheel made.
Rounded double convex body.
Top, slightly depressed. Nozzle, square at end, curving on top ... 17 March 1932 |
| Two small pieces missing, from rim and from body. Wheel made.
Double convex body. Depressed top.
Short nozzle, slightly turned up at fluked ends.
Base simulated by a groove round the bottom of the body ... 16 March 1932 |
A heavy triangular nozzle is preserved, rather shallow, flat on top, and with an extremely small wick hole in the tip.
The top of the nozzle merges with a small rim, down sloping round what appears to ... 19 March 1932 |
Miniature lamp. No handle.
Continuous rim, with rounded body.
Nozzle, flat on top; deep and broad.
High base.
Rather thin, lustrous black glaze, much flaked; base and lower front part of body, unglazed ... 30 March 1932 |
Upper part of two storied lamp. Nozzle, together with part of left side of lamp broken away. Traces of burning remain.
Rim, finished with a heavy ring round the outside and round the oil hole; the outer ... 31 March 1932 |
Lamp with incised decoration on nozzle. Vertical band handle broken away.
Shallow, double convex body. Wheel made.
Rim indicated only by groove scratched through glaze round filling hole; a similar scratched ... 2 April 1932 |
Left side of lamp, tip and left side of nozzle missing.
Shallow, curving body; the flat rim merging with the sides.
Small, horizontal band handle.
Small nozzle, encroaching somewhat on rim.
The inside, ... 2 April 1932 |
Seems to preserve part of central tube for setting on stand.
Good brownish-black glaze, much worn.
Gray clay.
Type XIX (?) of Corinth collection, type 27 variants of Agora collection. Leica, L-91 PD 635-100 ... 4 April 1932 |
Body with nearly vertical sides, curving in rapidly to base from point of greatest circumference.
Broad top; meets sides at an angle; filling hole, surrounded by narrow insloping rim set off by broad groove ... 5 April 1932 |
End of nozzle broken away.
Double convex body with sharp angle between halves.
On rim, raised ovolo. Top surrounded by high edge.
Filling hole with slightly raised edge with three auxiliary holes.
Nozzle, ... 7 April 1932 |
| Double convex body, the lower half much deeper than the upper; on the left side, a solid, cornucopia-like knob.
Very small top, surrounded by a heavy ridge.
Long nozzle, rising to a narrow grooved band ... 16 April 1932 |
|
|
